Breaking News

Selasa, 26 Mei 2015

Home > U.S. Tornadoes, Flooding: Death Toll Climbs as Plains Brace for More Storms


PHOTO: Residents stand outside their homes as damaged cars are seen after a tornado hit the town of Ciudad Acuna, state of Coahuila, May 25, 2015.
Auto Start: On | Off
A tornado ripped through a city on the U.S.-Mexico border today, killing at least 13 people, and more storms and flooding battered Texas and the souther Great Plains.
The tornadoes and flooding that forced at least 2,000 Texans from their homes came out of a line of storms that stretched from the Gulf of Mexico to the Great Lakes, dumping record rainfall on parts of the Plains and Midwest.
The deadly tornado that hit Ciudad Acuna, Mexico, just two miles from Laughlin Air Force base, was one of at least 15 reported today. It tore a baby from its mother's arms, ripped apart buildings, tossed cars and trucks around, in some cases leaving them standing on end.
In the flooding that hit parts of Texas, one driver had to be rescued as the surge of water swept away his SUV outside San Antonio. At least five people were killed, and 12 were missing as a result of flash floods along the Blanco River between Austin and San Antonio, officials said.
Among the dead was 14-year-old Damien Blade, who was found with his dog in a suburban Dallas storm drain. Investigators said they apparently had drowned but their investigation continues. According to police, Damien's family reported him missing about 10 p.m. Sunday after one of his two dogs showed up alone at the house, wet and extremely muddy.
The 12 people missing were all staying in a vacation home that was swept away by rushing floodwaters.
PHOTO: Edgar Mascorro, left, and Emir Nevarez check out the damage on the rooftop at the Silver Springs Apartments in North Austin, Texas, May 24, 2015.
Ricardo B. Brazziell/Statesman.com/AP Photo
PHOTO: Edgar Mascorro, left, and Emir Nevarez check out the damage on the rooftop at the Silver Springs Apartments in North Austin, Texas, May 24, 2015.
In the town of Wimberley alone, as many as 400 homes have been destroyed.
Texas Gov. Greg Abbott said after flying over the area today that the region looked like it had been hit by a tsunami.
"The area around the river, where these huge massive trees just mowed down, like grass that was mowed down by a lawn mower," he said. "You see how powerful the river flow has been."
The force of the water was so strong, that some homes that were in its path looked like they had been hit by a tornado.
PHOTO: A home on the Blanco River was taken off its foundation after heavy overnight rain caused flash flooding in Wimberley, Texas, May 24, 2015.
Rodolfo Gonzalez/Statesman.com/AP Photo
PHOTO: A home on the Blanco River was taken off its foundation after heavy overnight rain caused flash flooding in Wimberley, Texas, May 24, 2015.
Within a matter of hours, the Blanco River rose from 5 feet to more than 40 feet, and the flood came rushing with such force that it swept away a concrete bridge.
Abbott added 24 counties today to the list of those where he has declared a state of emergency, and he said that with more rain in the forecast, more counties could be on that list:
"The rain bands that span literally from south of the Rio Grande to north of the Red River have been relentless, day after day after day," he said.
The storms were blamed for three deaths Saturday and Sunday, including two in Oklahoma and one in Texas, where a man's body was recovered from a flooded area along the Blanco River.
The Associated Press contributed to this report.
Read more ...

Download New Google Chrome v40.0.2214.111 - Full Standalone Offline Installer


Google Chrome is a freeware web browser developed by Google. It used the WebKit layout engine until version 27 and, with the exception of its iOS releases, from version 28 and beyond uses the WebKit fork Blink. It was first released as a beta version for Microsoft Windows on September 2, 2008, and as a stable public release on December 11, 2008.

Developer: Google Inc.

Google Chrome is one of the best solutions for Internet browsing giving you high level of security, speed and great features.

What's New in This Version?
This update includes 11 security fixes. A full list of changes is available in the log.

Download New Google Chrome 40 Offline Setup From Bellow:

http://downloads.ziddu.com/download/24536835/Chrome-Installer---40.0.2214.111---32bit.exe.html



Software Information:
File size: 39 MB / 44 MB
Requirements: Windows 2000 / XP / Vista / Windows7 / XP64 / Vista64 / Windows7 64 / Windows8 / Windows8 64
Languages: Multiple languages
License: Open Source
Release Date: February 05, 2015
Author: Google
Read more ...

Download New Internet Download Manager (IDM) v6.23 Build 10 Final - Full Version

Internet Download Manager (IDM) is a tool to increase download speeds by up to 5 times, resume and schedule downloads. Comprehensive error recovery and resume capability will restart broken or interrupted downloads due to lost connections, network problems, computer shutdowns, or unexpected power outages.

Developer: Tonec Inc.

Features Of This Software:
Resume and schedule downloads
Resume capability
Error Recovery
Proxy Server Support
FTP and HTTP Protocol Support
MP3 audio and MPEG video content processing
Multilingual support

What's new in version 6.23 Build 10 Final:
 Added support for Firefox 38

Download Internet Download Manager With Crack Files From Bellow:
http://downloads.ziddu.com/download/24536802/ATH---IDM-v6.23-Build-10-Final-Cracked.zip.html
                                                              
Software Information:
File size: 7 MB
Requirements: Windows (All Versions)
Languages: Multiple languages
License: Shareware (With Full Version Cracked)
Date Released: April 02, 2015


How to Install and Activate Full Version:
1. Install The App. 2. Exit The App from System Tray. 3. Copy Content from Crack Folder to Install Directory. 4. Register using Reg.key Given in Crack Folder.
5. You Have Done ......Just Open IDM..........And Enjoy .... :)
Read more ...

Minggu, 24 Mei 2015

7 Tips to Customize WordPress Twenty Eleven Theme

A lot of WordPress websites are built upon, and still use, the previous default WordPress Theme Twenty Eleven. I will show you 7 tips that you can use to customize the Twenty Eleven Theme.
The WordPress Twenty Eleven Theme
With most of the tips you don’t even need to know much about PHP coding, just how to install a special Twenty Eleven plugin.

Tip 1: Install WordPress Twenty Eleven Theme Extensions

Twenty Eleven Theme Extensions is the plugin you want as it can solve most of the problems people are facing with Twenty Eleven.
To install this plugin go to Plugins -> Add new -> Search Twenty Eleven Theme Extensions and select it from the list.
Click on install and confirm that you want to install it. After installation make sure you click the active option.
You should now see an extra option under Appearance called Theme Extensions. We will go though the options in this post as most of the options  you want to change.
Twenty Eleven Theme Extensions Options

Tip 2:  Twenty Eleven Sidebar on All pages

If you look at the default layout of the Twenty Eleven theme you will see that the sidebar is only visible on the Home page.
But you want to have that sidebar on all pages, including posts. If you only want it on pages, you can select that option via the  Page Attributes in the right side menu of your edit screen.
Page Attribute Sidebar Template Option
Unfortunately that means you have to do that on every page and you still wouldn’t have the sidebar on posts. To change this, click the upper two options in the extensions plugin settings.
Twenty Eleven Sidebar on All Pages

 Tip 3:  Change the Header Image and Size on Twenty Eleven

The default header size for the Twenty Eleven Theme is 1000 width x 288 pixels in height.  Which is pretty high and takes a lot of space on your screen. You can easily change that with the extensions option Change the height of new images.
Twenty Eleven Theme Header Change
If you already have some headers installed, make sure you check the second option as well.
Better would be to create and upload new images in the right format or crop them upon upload.
You can upload new header images via Appearance -> Header -> Choose or Upload a new header file. Once you uploaded more than one header file you can switch the headers automatically by selecting the Random option.
Twenty Eleven Header Uploads and Selection
Note: Did you know you can set a special header for each post or page? Create a special header in the same size as the standard one (here it is now 1000 x 175 pixels) 1000 x 288 is the Twenty Eleven standard format.
Now go to the page or post you want that header to show up and select the option Featured Image, upload or select the header and update the page / post.
Featured Header Image Option

Tip 4:  Twenty Eleven Theme Change Menu Color and More

One of the most asked questions on Twenty Eleven is how to customize the Menu Color and other items like the link colors and text color. With the extensions plugin you need to check the Custom Color option to get this done.
Once you activate that option you get new selections in the the Appearance -> Theme Options. You ahd a few options on that in the standard theme options, now you get a big list of things you can change.
Customize the colors on Twenty Eleven
For the menu color change look for Menu Background Color, Menu Highlight Color and if needed Menu Text Color.
You can select the colors from the button next to the color, or put in the hex (#de000a).  If you want color suggestions, check out http://www.colorhexa.com/ and http://www.colorcombos.com/

Tip 5: Remove Search from Twenty Eleven Top

As we have the last option in the extensions called Custom Style we can used that directly to remove / hide the Search Option in the top title area. Activate the Custom style option and place this code in it:
/* Search Form */
 #branding #searchform {
 display: none;
 }
So you should end up with this:
Twenty Eleven Remove Hide Search

Tip 6:  Remove / Hide Twenty Eleven Topmenu  Navigation

Some people don’t like to have the Top Navigation menu below the header image and only want to use a custom menu in the sidebar.
Twenty Eeleven Main Navigation Menu
If you also want to remove that menu, then this simple trick is for you. First create a custom menu, lets call it Blank. You leave that menu empty, so not even a Home link. Now set that Blank  as the primary navigation option and check your website, you should not see the navigation anymore.
Custom Blank Menu
Example, Twenty Eleven with smaller header and no main navigation bar.
Twenty Eeleven Main Navigation removed

Tip 7: Remove the Comment Function from Twenty Eleven Pages

On Twenty Eleven pages you can see that there is also the possibility to comment on that page.
If its a real static pages, like a contact form or a sitemap, you don’t want people to comment on the content of that page.
I only want comments on my posts, not on pages. So the option to disable all comments is not an option. Instead change the screen options display when you are in the edit screen for a page.
Start with the screen options tab (upper right corner)
WordPress screen display options
On that screen enable the Discussion option by checking it, this will display the Comments option below your main content edit screen.
D:Afbeeldingenitmentorwordpress-discussion-options.png
Un-check both options and the comments form will be gone from your page. You need to do this on all current and new pages!

Bonus Tip: Remove / Customize Proudly Powered by WordPress from Twenty Eleven Footer

In this case we do need to work on a core file from the Twenty Eleven Theme, specially the file called footer.php
It would be better to do this on a Child Theme, but for this purpose it will not be such a problem. You just need to make sure you do it again it there should come an update for the Twenty Eleven Theme.
Go to Appearance -> Editor -> Open the file Footer (footer.php)
Search for <div id="site-generator">
You need to replace the code between that code and the first </div> after that code. replace the code:
<?php do_action( 'twentyeleven_credits' ); ?>
<a href="<?php echo esc_url( __( 'http://wordpress.org/', 'twentyeleven' ) ); ?>" title="
<?php esc_attr_e( 'Semantic Personal Publishing Platform', 'twentyeleven' ); ?>"><?php printf
( __( 'Proudly powered by %s', 'twentyeleven' ), 'WordPress' ); ?></a>
With
<p>Copyright &copy; - <?php echo date('Y'); ?>
<a href="http://www.example.com" rel="nofollow">
 Special Example Link Website</a></p>
Change www.example.com with your own URL and the text for the link to fit your website. All done, you should see your own text in the footer and it should link back to your homepage.
Other Twenty Eleven Theme customization’s?
Above are the most request changes for the WordPress Twenty Eleven theme. Did they work for you? Or do you have extra needs or idea’s or suggestions?
Read more ...

Sabtu, 23 Mei 2015

Will the Surface 3 Tablet Be a Game-Changer for Microsoft?


Microsoft has been trying for years -- and, for the most part, failing -- to compete in the tablet arena with the iPad. The huge success of Apple’s tablet, and to a lesser extent, the various Android tablets, has convinced Microsoft that there’s gold in them thar devices.
It has called its line Surface, and over the years has tried a succession of Surfaces. None have set the world on fire with sales, although each new version has improved on the previous one.
The latest version is the Surface Pro 3.
Sticker Shock
But a big barrier to the Surface’s success has always been the high price tag. When you outfit it modestly well, it’ll probably cost you $1,000 or more, making it a good bit more expensive than a typical iPad.
This issue is that people are used to paying a premium for an Apple product, knowing that they’re going to get their money’s worth. On the Windows side of the ledger, though, price has always been a more important factor. And even though the Surface Pro 3 is a more capable work machine than an iPad, it's still more than many are willing to spend. If folks want a laptop for work, there are plenty of cheaper Windows choices than a Pro.
That may have all changed with the introduction of the Surface 3, the first true hybrid tablet/laptop at an attractive price point.
Note that I didn’t say Surface “Pro” 3 – it’s just the “Surface 3”. It can be confusing to distinguish between the two, so I wanted to point out a few of the differences to help you tell them apart.

2 Major Differences
There are two primary distinctions between the Surface Pro 3 and the Surface 3: price and capability. The Surface Pro 3 is much more expensive, as well as more capable. But that doesn’t mean it’s the best Surface tablet for you.
The Surface 3 starts at $499, which definitely makes it competitive with the entry-level iPad Air 2, the most current iPad model. Consider, for example, that the cheapest Surface 3 has a 64GB hard drive, while the iPad offers a microscopic 16GB hard drive for the same price. That’s four times the storage, which can make a big difference.
Back to the Surface Pro 3 comparison. The cheapest Surface Pro 3 comes in at $799, so you’re laying out $300 more for the higher-level tablet.
The Surface 3 uses the same Windows 8.1 operating system (OS) as the Surface Pro 3, and will be equally upgradeable to Windows 10 when it releases this summer (allegedly -- always allegedly when you’re talking about software release dates). The upgrade will be free.
Also like its upscale cousin, the Surface 3 will have as a (necessary) option a separate keyboard, called a Type Cover. The keyboard serves double duty as a cover (not surprising, since it’s in the name). With the keyboard attached, it becomes much more like a laptop, but one with touchscreen functionality when you want to use it as a tablet.
Smaller, Lighter
The Surface 3 is lighter and smaller than the Surface Pro 3, with a 10.8-inch screen vs. the Pro’s 12-inch screen. These smaller dimensions mean that the Surface 3 is nearly a half-pound lighter than the Pro, which can add up if you tote it around everywhere.
Where it suffers compared to the Pro is in the less-powerful processor and (generally) less RAM. The Surface 3 isn’t up to heavy-duty tasks like photo and video editing, and will perform the things it does do slightly more slowly than the Pro (although for typical stuff, you won’t notice any difference). The Surface 3 is more for Web surfing, social media, streaming video, etc. It will also function well for students, as it will work fine for writing papers, note-taking and similar duties.
In that way, it's pretty much identical to the iPad; they can both handle the same types of workloads. But the Surface 3, with the Type Cover, is a more capable laptop-style computer than the iPad. And it keeps you in the Windows world, which is a more comfortable place for many.
Neither the Surface 3 nor the iPad can touch the Surface Pro 3 for productivity, though. So if you want something closer to a real laptop or desktop replacement, the Pro is a better bet. Ultimately, it comes down to how you’ll use your Surface. I think that, everything being equal, that the Surface 3 is a better value: it’s lighter and significantly cheaper than the Pro, making it more affordable for more people without crippling compromises on performance.
Coming Soon
According to Microsoft's Brandon LeBlanc, the Surface 3 is available for preorder now, and will be on officially on sale beginning May 5. If you live anywhere near a Microsoft store, they should have one available for a test drive, which I'd recommend.
I’ll be writing much more about the Surface 3 in the coming months. For now, suffice to say that I’m really, really excited about a Microsoft tablet.
Finally.
Read more ...

How To Install Windows 8 or 8.1 From a USB Device






The need to install Windows 8 or Windows 8.1 from a USB device, like a flash drive, is a common one these days.
It's no surprise why - many new computers, especially tablets and smaller laptops and desktops, no longer have optical drives.
That Windows 8 install disc doesn't do you much good if you don't have anywhere to put the DVD!
Prefer screen shots? Try my Step by Step Guide to Installing Windows 8/8.1 From a USB Device for an easy walk-through!
Windows 10 Users: See my How to Burn an ISO File to a USB Drive for an easier way of getting the Windows 10 Technical Preview ISO image to a USB drive for installation.
If you want to install Windows 8 from a USB device, you'll need to get those setup files from the DVD to the USB drive. Unfortunately, simply copying them there won't do. Windows 8 is also sold as a downloadable ISO file which, if you choose to buy Windows 8 that way, requires similar steps to get it properly copied to a USB drive.
Regardless of whether you have a Windows 8 DVD you need to get on a flash drive, or a Windows 8 ISO file with the same goal, the following tutorial will help you get the Windows 8 installation files properly copied to a flash drive so you can get on with the installation process.
Difficulty: Average
Time Required: Getting the Windows 8 installation files onto a flash drive or other external USB device will take between 20 and 30 minutes, depending on what format your copy of Windows 8 is in right now and how fast your computer is.
Applies To: The following procedure applies equally to Windows 8 (standard) or Windows 8 Pro, as well as those editions of Windows 8.1.
Requirements:
Important: If you have a Windows 8 ISO file and want that on a flash drive, start with Step 2. If you have a Windows 8 DVD and need that on the flash drive, start with Step 1.

How To Install Windows 8 or 8.1 From a USB Device

  1. Create an ISO file from the Windows 8 DVD. This is the procedure by which you create a single file, called an ISO image, that contains all the data stored on the Windows 8 setup DVD disc.

    Once you have an ISO image created from your Windows 8 disc, come back here and continue on with this tutorial which will explain how to get that ISO file onto a flash drive.

    Note: If you already know how to create ISO files with your favorite program, often called "ripping," then do so in whatever way you're used to doing it. However, if you've never created an ISO image, or don't have a program installed right now that does it, please see the linked tutorial above for complete instructions on doing so with a free program.
     
  2. Download the Windows 7 USB/DVD Download Tool from Microsoft and then install it.

    This free program from Microsoft properly formats your flash drive and then copies the contents of the Windows 8 installation ISO file you have to that flash drive.

    Note: Don't worry that this program has Windows 7 in the title. This program works perfectly well with Windows 8 ISO files and can be used in Windows 8, Windows 7, Windows Vista, or Windows XP.
     
  3. Start the Windows 7 USB DVD Download Tool program. You should be able to find the shortcut on the Desktop, as well as in your Start menu or on your Start screen, depending on which version of Windows you installed the program on.
     
  4. Click Browse on the Step 1 of 4: Choose ISO file screen.
     
  5. Locate, and then select, your Windows 8 ISO file. Then click or touch Open.

    Note: If you downloaded Windows 8 from Microsoft, check your Downloads folder or your Desktop for the ISO image. If you created an ISO image from your Windows 8 DVD, the ISO file will be wherever you created it to.
     
  6. Click or touch Next.
     
  7. Choose USB device on the Step 2 of 4: Choose media type screen.

    Note: As you can see here, there is also a DVD option. While it doesn't do us much good in this case, since the end game is to get Windows 8's setup files on a flash drive, you could also use this tool to burn a Windows 8 ISO image to a DVD or BD disc.
     
  8. On the Step 3 of 4: Insert USB device screen, choose from the drop-down box the flash drive or USB-connected external hard drive you want to put the Windows 8 setup files onto and then touch or click Begin copying.

    Tip: If you haven't yet plugged in the USB storage device you're planning on using, you can do that now and then touch or click the blue refresh button to make it show up in the list.
     
  9. Click or touch Erase USB Device if you're prompted to do so on a Not Enough Free Space window. If you don't see this, don't worry, it just means that your flash drive or external hard disk is already empty.

    Important: If this message didn't make it apparent, you should know that whatever data you might have on this drive is going to be erased as part of the process of getting the Windows 8 setup files copied.
     
  10. On Step 4 of 4: Creating bootable USB device, just wait for the Windows 7 USB DVD Download Tool to prepare the drive and copy the Windows 8 installation files to it.

    The first Status you see will be Formatting, which will take anywhere from a few to several seconds, depending on how large the USB drive is that you're using. Next will be Copying files which could take anywhere from 15 to 30 minutes, possibly longer, depending on which Windows 8 ISO file you're working from, as well as on how fast your flash drive, USB connection, and computer is.

    Tip: Don't worry if the percentage indicator jumps ahead quickly but then sits on a single number for a very long time. While it might not make a lot of sense to behave that way, it doesn't necessarily mean anything is wrong.
     
  11. Assuming everything went as planned, the next screen should say Bootable USB device created successfully with a Status that says Backup completed.

    You can now close the Windows 7 USB DVD Download Tool program window. The flash drive, or other external USB drive you're using, now has the necessary files on it to install Windows 8 and is also properly configured to be booted from.
     
  12. Boot from the USB device that you just created to start the Windows 8 install process.

    Tip: If the Windows 8 setup process doesn't start, it's very likely that you'll need to make boot order changes in the BIOS. See How To Change the Boot Order in BIOS if you need help doing that.

    Tip: If you have a UEFI based system and you still can't boot Windows 8 Setup from the flash drive, even after setting the USB device first in the boot order, see Tip #1 below for help.

    Note: If you came here from my How To Clean Install Windows 8 or 8.1 tutorial, you can return there now to continue the walkthrough of that process.

Tips & More Information

  1. The Windows 7 USB DVD Download Tool formats the USB drive as NTFS, a file system that many UEFI based computers will not boot from when on a USB drive.

    To work around this issue, do this:
     
    1. After Step 11 above, copy all of the files from the flash drive to a folder on your PC.
    2. Format the flash drive manually, using the older FAT32 file system.
    3. Copy all of the files from the folder you made in Step 1 back to the flash drive.
    4. Repeat Step 12 above.
  2. There is an alternative method for getting a Windows 8 or 8.1 ISO image properly onto a USB drive. See How to Burn an ISO File to USB for a walkthrough. I prefer the procedure I've outlined above, but if you have trouble with it, that general ISO-to-USB procedure should work as well.
     
  3. Still having trouble installing Windows 8 or 8.1 from a flash drive or other USB device? See Get More Help for information about contacting me on social networks or via email, posting on tech support forums, and more.
Read more ...

How To Install Windows 7 From USB





Sandisk Cruzer Glide USB Flash Drive.  
Chances are you'll need to install Windows 7 from a USB device if you have a tablet, or small laptop or netbook device, few of which include optical drives as standard hardware.
This means that you must get the Windows 7 setup files onto a flash drive (or any USB based storage) and then boot from that flash drive to get the Windows 7 installation process started.
However, simply copying the files from your Windows 7 DVD to a flash drive won't work.
You have to specially prepare the USB device and then properly copy the Windows 7 install files to it before it'll work as you expect.
You're in a similar, but slightly easier to solve, situation if you've purchased a Windows 7 ISO file directly from Microsoft and need that on a flash drive.
No matter what situation you're in, just follow the instructions below to install Windows 7 from a USB device.
Note: The following tutorial applies equally to whatever edition of Windows 7 you have a disc or ISO image of: Windows 7 Ultimate, Professional, Home Premium, etc.
Difficulty: Average
Time Required: Correctly preparing a USB drive for use as an installation source for Windows 7 will take around 15 to 30 minutes depending on your computer speed and what edition of Windows 7 you have on DVD or in ISO format
Requirements:
  • Access to a computer with Windows 7, 8, Vista, or XP installed and working properly, as well as with a DVD drive if you have a Windows 7 DVD
Important: Start with Step 1 below if you have a Windows 7 DVD or Step 2 if you have a Windows 7 ISO image.

How To Install Windows 7 From USB

  1. Create an ISO file from the Windows 7 DVD. If you already know how to create ISO images, fantastic: do it, and then come back here for further instructions on what to do with it.

    If you've never created an ISO file from a disc before, check out the tutorial linked above. It'll walk you through installing some free software and then using it to create the ISO. An ISO image is a single file that perfectly represents a disc... in this case, your Windows 7 installation DVD.

    Next we're going to work on properly getting that Windows 7 ISO image you just created onto the flash drive.
     
  2. Download the Windows 7 USB/DVD Download Tool from Microsoft. Once downloaded, execute the file and follow the installation wizard.

    This free program from Microsoft, which works in Windows 8, Windows 7, Windows Vista, or Windows XP, will correctly format the USB drive and then copy the contents of your Windows 7 ISO file to the drive.
     
  3. Start the Windows 7 USB DVD Download Tool program, which is probably located in your Start menu or on your Start screen, as well as on your Desktop.
     
  4. On the Step 1 of 4: Choose ISO file screen, click Browse.
     
  5. Locate, and then select, your Windows 7 ISO file. Then click Open.

    Note: If you downloaded Windows 7 directly from Microsoft, check for the ISO image wherever you tend to store downloaded files. If you manually created an ISO file from your Windows 7 DVD in Step 1 above then it will be wherever you created it to.
     
  6. Click Open.
     
  7. Click Next once you're back on the Step 1 of 4 screen.
     
  8. Click USB device on the Step 2 of 4: Choose media type screen.
     
  9. On the Step 3 of 4: Insert USB device screen, choose the flash drive or external hard drive you want to put the Windows 7 installation files on.

    Tip: If you haven't yet plugged in the flash drive or other device you're using then you can do that now. Just click the blue refresh button to make it show up in the list.
     
  10. Click the Begin copying button.
     
  11. Click Erase USB Device if you're prompted to do so on a Not Enough Free Space window. Then click Yes to the confirmation in the next window.

    Note: If you don't see this it just means that the flash drive or external hard disk you've selected is already empty.

    Important: Any data you have on this USB drive will be erased as part of this process.
     
  12. On Step 4 of 4: Creating bootable USB device, wait for the Windows 7 USB DVD Download Tool to format the USB drive and then copy the Windows 7 installation files to it from the ISO image you provided.

    You'll see a Status of Formatting for several seconds, followed by Copying files. This part might take as long as 30 minutes, maybe even longer, depending on which edition of Windows 7 the ISO file you have is from, as well as on how fast your computer, USB drive, and USB connection is.

    Tip: The percentage complete indicator may sit on one or more percentages for a long time. This does not mean anything is wrong.
     
  13. The next screen you see should say Bootable USB device created successfully.

    You can now close the Windows 7 USB DVD Download Tool program. The USB drive can now be used to install Windows 7.
     
  14. Boot from the USB device to start the Windows 7 setup process.

    Tip: You may need to make changes to the boot order in BIOS if the Windows 7 setup process doesn't start when you try to boot from the USB drive. See How To Change the Boot Order in BIOS if you've never done that.

    Tip: If you still can't get the flash drive to boot, and you also have a UEFI based computer, see Tip #1 below for help.

    Note: If you arrived here from How To Clean Install Windows 7, you can now return to that tutorial and continue installing Windows 7. See How To Install Windows 7 if you weren't doing a clean install or you're not sure what kind of installation to do.

Tips & More Information

  1. When the Windows 7 USB DVD Download Tool formats the flash drive during the process above, it does so using NTFS, a file system that some UEFI systems won't boot from if on a USB stick.

    To get the USB drive to boot on these computers, you should copy the data from the flash drive onto a folder on your computer, then reformat the flash drive using the older FAT32 file system, and then copy that same data back onto the drive.
     
  2. See my How to Burn an ISO File to USB tutorial for an alternative method for getting a Windows 7 ISO image onto a USB drive. I much prefer the instructions I've outlined above, but if you have trouble getting it to work, the general ISO-to-USB walkthrough should do the trick.
     
  3. Having trouble installing Windows 7 from a flash drive or other USB device? See Get More Help for information about contacting me on social networks or via email, posting on tech support forums, and more.
Read more ...

How To Remove Quick Edit Icon Blogger

For Blogger, it would never see an icon shaped pliers and a screwdriver in your template. Which looks like this:

This is a tool that serves to directly edit the widgets on the blog pages. So you no longer need to go to the Page Elements for editing. That way you can be easier to manage your blog

Actually this tool, will only appear if we log into blogger account. So if we go to our blog without logging into blogger then this icon will not appear as well as visitors who visit our blog.
  But for those who feel less comfortable with this tool you can eliminate them in the following manner:

1. Log in to Blogger. Click Design -> Edit HTML.
2. Then backup your template by clicking on Download Full Template 3. If you have, put checks on "Expand Widgets Templates"
4. Find Press Ctrl + F to open the Find box
5. Type the code <b:include name='quickedit'/> into the box and click Next
6. If you've met, remove the code. Each code represents a single icon <b:include name='quickedit'/> pliers and a screwdriver so if the template you have more than one icon pliers and a screwdriver. Use Ctrl + F to search for it.
7. If so remove them all. Click Save Template then click View Blog to see the results. Now all the quick edit icon in the form of pliers and a screwdriver was tudak exist anymore. If still there, probably still there name='quickedit'/> <b:include code that has not been erased.  Try searching again with the above.
 
Note:
Well, if you have trouble with all that there is a very practical way that is just a way to insert the code below the above code ]]></ b: skin>

.quickedit{
display:none;
}
Save, and finished ...

Good luck
Read more ...

Senin, 02 Maret 2015

Cara Meletakkan Sumber saat Artikel di Copas



Cara Meletakkan Sumber saat Artikel di Copas - Manfaat meletakan/memasang Link Sumber Otomatis ini adalah pada saat orang mengcopy paste artikel kita lalu sumber link tersebut otomatis akan muncul di paling bawah artikelnya . Tutorial meletakkan sumber ini bertujuan untuk mencegah agar orang tidak sembarangan mengcopy paste artikel kita. Kalau mau mengcopy paste, artikel nya harus sedikit berbeda dengan artikel tersebut. Tetapi link sumber ini bisa dihapus secara manual . Baiklah langsung aja ikuti tutorial berikut ini : 
1. Kunjungi situs Tynt
2. Disitu sobat Klik Start here. it's free! -->
 
3. Kemudian sobat isi Formulirnya 
*Email : isi email sobat
*Domain : isi dengan URL blog sobat Misalnya : tutorial-blogz.blogspot.com
*Password : isi dengan password sobat
*Confrim Password : isi kembali password sobat
*Centang I agree the Usage and Privacy Agreements
*Dan Klik Sumbit -->
4. Kemudian sobat akan dibawa ke halaman seperti gambar dibawah ini
 
5.  Sesuaikan atributnya, baru Klik Next -->
6. Copy Kode Script nya
 
7. Login ke Blogger terlebih dahulu. 
8. Pilih menu Rancangan --> Edit HTML --> Centang Expand Template Widget 
9. Paste kode diatas di atas kode </head>
10. Terakhir Klik Simpan Template
Mudah kan ?? Selamat mencoba :)
Read more ...
Designed By Blogger Templates